Bricks and concrete pavers are laid in a variety of patterns for walkways, driveways or patios. These bonds, also called paving patterns, are weak so they aren't generally used in wall construction, though they can be used in panels to add variety to a wall. In most cases, these bonds must be tied to the wall with wall ties.
The brick used can either be laid on its edge or flat. When estimating brick to be laid flat, plan to use one third less than for brick to be laid on its edge.
The Herringbone Pattern is laid with the end of a brick at a right angle to the side of the second brick. It is a desirable design for paving because of the absence of continuous joints that prevents settling or cracking.
The Basketweave Pattern consists of a series of two stacked headers laid next to two stacked stretchers. Continuous joints are formed both vertically and horizontally. The mortar joints between the headers and stretchers create the bond's effect.
The Diagonal Pattern is formed by laying ordinary straight stretcher courses at 45 degree angles. The cross-joints line up and form right angles to the bed joints.
Bon Tool Co. has made a serious effort to provide exact and current information, but does not guarantee the accuracy of the data. Bon Tool Co. cannot assume responsibility for the application of information nor guarantee results.
